Clutches - M8

The sliding weight creates 105 lbs extra clamping pressure at 4000RPM. Installing the SDR without changing the coil springs will increase the clamping force by 40%

Pricing and availability subject to change without notice.

Item VP-SDR

Parts # VP046-SDR

MSRP $399.00

Harley-Davidson® Assist and Slipper Clutch; 3 Stud Style Clutch.

Fitment

• '13 and later CVO 110' Motor Models
• '13 and later Tri-Glide and Free Wheeler
• '17 and later Touring Models
• '15 and later Ultra Limited Low and Electra Glide Classic Low Models
• '15 and later 110' Softail Models

SDR clearance will work with most stock Harley-Davidson® derby covers. Please check our fitment chart, and also download and print out our derby cover gauge to properly check clearances.

( If there are any clearance issues, a 1/4 spacer will be needed per application. )

Features

• With the OEM 2013 and up CVO springs, it handles up to 120 ft-lbs torque.
• Slider Weights design: will fit behind stock, 103, 110 derby covers.
• 15 minute installation.
• Install through the derby cover without removing the primary cover.
• No modifications needed.

Kit Contents

• VP-SDR Variable Pressure Unit
• Mounting Hardware
• Instructions

The Screamin' Eagle High Capacity Clutch Kit increases the drivetrain's ability to reliably support high torque applications without significantly increasing lever effort. Designed to fit in the stock clutch basket, this kit provides smooth shifting, progressive engaugement and works with the factory Assist and slip clutch system to keep clutch lever effort similar to the stock levels.
Kit comes with 10 fiber clutch plates and 10 contact plates and 3 1200 Newton clutch springs.